Raymarine RV-220 RealVision 3D Bronze 20° Thru-Hull Transducer System

Designed for inboard or outboard boats, the RV-220 Bronze Thru-Hull Transducer System lets you easily identify structures and locate fish with the lifelike clarity of RealVision 3D sonar. The RV-220 system is a 4-channel, wide-spectrum CHIRP transducer system with DownVision, SideVision, high-frequency CHIRP fish targeting, and RealVision 3D sonar inside. The transducer system has a built-in attitude and heading reference system (AHRS) that stabilizes the sonar imagery, automatically compensating for vessel motion. You’ll enjoy crystal-clear imagery in waves, swells, and while maneuvering. The RV-220 system also has a built-in, fast-response water temperature sensor for quick, accurate readings. The RV-220 Bronze Thru-Hull Transducer System Pack contains a pair of RealVision 3D transducers with internal offset to accommodate hull deadrise angles from 13° to 20°. This completely eliminates the need for fairing blocks. The low-profile design slips effortlessly through the water without causing drag or cavitation. The near-flush RV-220 system works great on trailered boats, too. The RV-220 system features rugged, cast-bronze thru-hull bodies suitable for fiberglass or wooden hulls. One transducer transmits and receives to port and downwards, the other to starboard and downwards, ensuring a full 180° of underwater coverage even on boats with deep keels or other underwater protrusions. Each transducer features a 2m pigtail, joining Y-cable, and 8m extension cable, resulting in an overall cable length of 10m. Model#: T70319.IN THE BOX:* RV-220P Bronze Port Transducer with 2m Cable* RV-220S Bronze Starboard Transducer with 2m cable* RealVision 3D Transducer Y-Cable* RealVision 3D 8m (26.2 ft.) Transducer Extension Cable* Anti-Rotation Bolt Kit* Installation Instructions